Europa

Why EURO - Connectors ?
The European Union has led to the unifying and standardising of norms for all lift truck manufacturers.
Their products must therefore satisfy the norms included in the EEC European Machine Directive 89/392.
In the case of connectors the corrisponding requirements are defined in the EEC European Directive 73/23 - Low Voltage.
RAVIOLI’s EURO-Connectors have CE markings and are in conformity with the following Norms:
- The Norm DIN 43589 parts 1 and 2, which define unified distances between centres and unified dimensions.
- Recommendations FEM 4007a and 4007b
- EEC European Community Directive 86/663 Add.C
- Standardised European Norm EN1175-1
- EEC European Directive 73/23 - Low Voltage
Using EUROPE Series Connectors, RAVIOLI customers know that they are in conformity with the CEE Norms.

These connectors are suitable for linking electrical motors, batteries and battery chargers for lift trucks and electric vehicles up to each other.
Each model is made up of a plug and a socket different from each other.
The range includes three models:

80A: for 16 or 25 mm2 insulated cable
160A: for 25, 35, or 50 mm2 insulated cable
320A: for 50, or 70 mm2 insulated cable

All types are prepared for the use of reducing bushings depending on the diameter of cable used. The main contacts are in silver-plated electrolytic copper.
As laid down by the Norms:

The connectors are supplied with a coding pin for operating
voltage which ensures that only same voltage plugs and sockets
can be connected.
The codified values are 24-36-48-72-80-96V cc.
Standard equipment includes a cable clamp at the end of the
joined plug and socket, which guarantees protection degree IP23.
All electrical parts are protected against accidental contact.
In addition, two auxiliary contacts featuring maximum 20A continuous
duty with advance opening compared to the main contacts
can be mounted.

Back

Distribution or manipulation of our catalogs without our authorization shall be prosecuted according to law.

Products catalog
Europa

Send an inquiry